Advert:


Recent Forum Topics:

Google Translate:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: Ford Galaxy - Remote Key Fob Programming for Remote Central Locking (Mk2)  (Read 46738 times)

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 180
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
You can program a remote key yourself without any other tools or software. Gather all the remote keys you want to program as they must all be learnt at the same time - a total of 8 keys can be programmed to the system.

General Information:
The Galaxy uses a two button remote key operating on frequency 433.92 and using the Siemens Control System. When replacing the keyfob you must match these values or the new fob won't work! Some early Galaxys operate using an infrared control system with sensors located by the rear view mirror and above the tailgate - the following does not apply if you have this type of system!

2024-0

Programming Procedure:
Ensure the windows are closed and the headlights are off. If not already, unlock the car and then open and close the drivers door. The procedure will clear all the learnt remote key's from memory so you need to have all of them available.

The following points needs to be done within 5 seconds of each other:
1) Insert the key into the drivers door lock and rotate it to the unlock position (Forward) - hold for 1 second
2) Return to the rest position, pause briefly and then rotate to the unlock position again - hold for 1 second
3) Return to the rest position again, pause briefly and then rotate to the unlock position for a third time.
The alarm/immobiliser LED on the door should illuminate to indicate the activation of programming mode:
4) On the first remote key press and hold the Lock button
5) Whilst keeping the lock button depressed, press and release the unlock button 3 times
6) Release both buttons - the LED on the key will blink along with the LED on the drivers door to confirm successful coding.
7) Repeat steps 4,5 and 6 with any further key-fobs you wish to program
8) Wait for the drivers door LED to extinguish indicating the end of programming mode (Approximately 15 seconds from last key learnt)

2026-1
2028-2
2030-3



03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

 

Related Topics

  Subject / Started by Replies Last Post
0 Replies
5357 Views
Last Post July 20, 2014, 12:18:24 pm
by Mirez
0 Replies
8853 Views
Last Post July 20, 2014, 12:27:15 pm
by Mirez
3 Replies
2998 Views
Last Post March 05, 2016, 08:33:05 pm
by 2006ransome
1 Replies
2434 Views
Last Post January 02, 2018, 10:52:55 am
by Mirez
2 Replies
1993 Views
Last Post February 26, 2018, 08:39:42 am
by mike wilson
5 Replies
867 Views
Last Post June 15, 2019, 06:21:32 pm
by SirDavidAlhambra

Advertisement: