Recent Forum Topics:

Google Translate:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: Ford Galaxy - Retrofitting The Load Cover  (Read 7635 times)

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3770
  • Thanked: 178
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Ford Galaxy - Retrofitting The Load Cover
« on: October 01, 2012, 08:57:26 pm »
This details how to retrofit the load cover assembly. You'll need:

The front mounting plastics
Two brackets with screws (FINIS: 1051362 and 1051363 @ about £22 each - Read the note below!)
The rear retaining plastics and retention nuts (4x FINIS 7386488 @ 40p)
The load cover itself
Rivets and a rivet gun

Note: The two brackets are cheapest from a VW dealer with Part Numbers: 7M3868795 (N/S) and 7M3868796 (O/S) at £7.28 each. Since all of the assembly is VAG made then its a safe assumption that the rest of the plastics, clips. screws and parts can be sourced cheaper from them!

First, both rear quarter panels will need to be removed, see > HERE <

The plastics and brackets can be seen here, along with how the end assembly fits together:


First up, mount the two retention brackets. One either side and then riveted into position as shown:


The next stage is to locate the outlines on the rear of each panel which need to be cut out, there are two outlines per panel - a front and a rear:

Note the outlines are guides only, mark well within the guides and cut out carefully. Remember its always easier to cut more out later but impossible to put it back in! The three example photos below can be expanded by clicking to see how how they were cut out. Note the smaller plastic (Rear retention) piece requires two holes to be drilled for the shaft to fit through, again the markings are present on the panel but take take that it lines up before drilling! The retention plastic can now be fitted in place with the two nuts.


                       945-6          949-7          953-8


With the retention plastic's and brackets in place the panel can now be refitted. Once its back in position the front plastics can be screwed to the bracket and the load cover mounted in position:


The images for this document were provided by Gusty66 - Thanks!

03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

VCDS HEX/CAN - Scans/Coding done in Wiltshire in exchange for winegums! :)

Offline Chrispb

  • Mindsaysyesbodysaysnono
  • Administrator
  • Accredited Users
  • *
  • Posts: 3101
  • Thanked: 123
  • Model: Galaxy Mk2 Auto
  • Spec: 52reg TDI 115 Ghia
  • First Name: Chris
  • Region: South East
  • Country: United Kingdom
Re: Galaxy - Retrofitting The Load Cover
« Reply #1 on: October 06, 2012, 12:07:47 pm »
Parts list.

7M3 868776 71N Right front plastic mounting  £4.67
7M3 868796        Right metal bracket               Ã‚£7.40
7M0 868778 71N Right rear plastic mounting   Ã‚£2.74
7M3 868775 71N Left front plastic mounting    £4.67
7M3 868795        Left metal bracket                 Ã‚£7.40
7M0 868777A 71N Left rear plastic mounting   Ã‚£2.75

The plastics are trim coloured the 71N is for anthracite
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2009 Kia Sedona GS In Black 2.9CRDI 183PS. 5 Speed Manual WAV.
2003 MK2 Galaxy Ghia In Solid Black 1.9 TDI 115PS. 5 Speed Automatic.

Upgraded Eberspaecher booster heater  to independent heating with 7 day timer.

With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me.
All for a pint of Strongbow.

The Forum - The free forum for questions and answers relating to the Ford Galaxy, S-Max and C-Max


Related Topics

  Subject / Started by Replies Last Post
14 Replies
Last Post August 08, 2014, 03:31:50 pm
by Mirez
5 Replies
Last Post January 24, 2015, 04:56:54 pm
by Mirez
6 Replies
Last Post December 23, 2016, 05:26:46 pm
by Cripkey
18 Replies
Last Post May 14, 2017, 11:28:01 am
by insanitybeard
7 Replies
Last Post January 25, 2018, 07:54:52 pm
by zooankski
0 Replies
Last Post May 02, 2021, 01:29:51 pm
by KingyMAK