Advert:


Recent Forum Topics:

Google Translate:

Ford Galaxy / VW Sharan / SEAT Alhambra Forum:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: abs problem  (Read 3615 times)

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
abs problem
« on: January 26, 2018, 01:52:34 pm »
Hi all not been on for a while,
Anyway after replacing a faulty battery on the old gal ive now developed an abs fault. Ive ran vag short program and its coming up fault P01276  ABS Hydraulic pump V64 012 Electrical Fault in circuit, does this mean I need as new pump or controller or something simpler, if its pump has anyone got one to buy? The part code is 7M3907379E ATE VW
Many thanks if anyone can help

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: abs problem
« Reply #1 on: January 26, 2018, 06:32:49 pm »
So it only happened after battery change?

If so start by re checking the connections on battery etc to rule out poor or loose connection.

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: abs problem
« Reply #2 on: January 26, 2018, 06:33:29 pm »
Oh and any wiring plugs around battery that could have been knocked/disturbed while doing battery

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 179
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Re: abs problem
« Reply #3 on: January 26, 2018, 09:30:32 pm »
I would also take a look at the 3 fuses in the engine bay fuse box as IIRC one of those is the pump fuse V62. If you do need an ABS block then I have one 'in the stores' :)
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #4 on: January 27, 2018, 09:28:22 am »
well actually what happened was id suspected a faulty battery or alternator for a while, so I got aa out to confirm because of low charge and turn over over rate, found out it was battery in the end.
aa guy gave me a boost to get it started so I could go and buy a replacement, but as he did get me started the abs light and esp light came on for some reason but brakes not affected.Anyway fitted new battery but couldnt turn off lights on dash, so i ran vag lite and i came out with the code as said.
Ive checked all connections and the three fuses as said but no good

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #5 on: January 27, 2018, 09:39:55 am »
Thanks mirez and johnny for the input but I think I'm going to bite the bullet and get a new part
The parts I need are the abs pump/module pn.7M3907379E ATE vw/10.0925-0306.3 and pump no.7M3614111M with ESP in anyone has this available, pm me with a price and ill sort out payment
many thanks

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: abs problem
« Reply #6 on: January 27, 2018, 10:04:01 am »
Sounds like the boost start may have pushed too much power through ABS then,I take it you have tried resetting the fault code?

Offline Chrispb

  • Mindsaysyesbodysaysnono
  • Administrator
  • Accredited Users
  • *
  • Posts: 3102
  • Thanked: 123
  • Model: Galaxy Mk2 Auto
  • Spec: 52reg TDI 115 Ghia
  • First Name: Chris
  • Region: South East
  • Country: United Kingdom
Re: abs problem
« Reply #7 on: January 27, 2018, 11:13:46 am »
This all does seem a coincidence, problems starting the car and now ABS fault.
Are you sure the battery fuse box wiring is good? oxidation of the two large black cable terminals is quite common and gives the symptoms you have had
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2009 Kia Sedona GS In Black 2.9CRDI 183PS. 5 Speed Manual WAV.
2003 MK2 Galaxy Ghia In Solid Black 1.9 TDI 115PS. 5 Speed Automatic.

Upgraded Eberspaecher booster heater  to independent heating with 7 day timer.

With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me.
All for a pint of Strongbow.

The FordMPV.com Forum - The free forum for questions and answers relating to the Ford Galaxy, S-Max and C-Max

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #8 on: January 27, 2018, 01:21:58 pm »
yes johnny ive tried to reset  the code but just comes straight back up, and yes chris checked the fuse box by the battery for oxidation as that was my first port of call as it was fine the night before just slow turning over

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #9 on: January 27, 2018, 01:24:25 pm »
As above with the part codes if anyone has got these in working condition, I'm willing to buy them off anyone on the site

Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #10 on: January 27, 2018, 03:25:46 pm »
Just a quickie, is it possible to remove the abs control module while in situ for repair and still use the vehicle even though the pump is not working? would the system lose fluid and be driveable on basic brakes and be safe?or would the whole system have to be removed and brake lines disconnected and obviously undriveable till reffited and bled, just a thought!

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: abs problem
« Reply #11 on: January 27, 2018, 05:11:11 pm »
I would hazard a guess and say if you are looking at repair the whole unit will need to come off rendering car with no brakes until back on and bled??

Offline marcushamblin1976

  • Default User Group
  • Advanced Users
  • *
  • Posts: 81
  • Thanked: 3
  • Model: Sharan Mk2
  • Spec: 2003 tdi 115 pd
  • First Name: Marcus
  • Region: East Anglia
  • Country: United Kingdom
Re: abs problem
« Reply #12 on: January 27, 2018, 06:19:37 pm »
Make sure you have a good earth and good voltage at the abs pump before you "bite the bullet".

Sent from my SM-G930F using Tapatalk


Offline drilla1

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 2004 2.8 ghia
  • Region: West Midlands
Re: abs problem
« Reply #13 on: January 29, 2018, 02:50:37 pm »
Would anyone on the forum have a wiring diagram and fuse/relay location for the abs system on the 2.8 v6 2004 model please
Much appreciated

Offline Thomas Hövling

  • Default User Group
  • New Users
  • *
  • Posts: 1
  • Thanked: 0
  • Model: Sharan Mk2
  • Spec: -07 1,8T
  • First Name: Thomas
  • Region: Non UK
Re: abs problem
« Reply #14 on: March 08, 2018, 06:57:05 pm »
Hi!

I have also problem with abs light comes on and off on my sharan -07 1,8T.
At first time it come on was when disconnect the battery cable due to inspect the high voltage fuse box as is it was burned plastic cover top of the box. I thought that was the reason so I replaced that box without success. I have also look at earth connection under and behind the battery. The fault codes is saying something about abs pump not function.

I´m also really interested to have a look into electric diagram to be able to measure that I have power supply to abs pump.

thanks

 

Related Topics

  Subject / Started by Replies Last Post
0 Replies
8452 Views
Last Post February 03, 2012, 10:42:47 pm
by Chrispb
1 Replies
3407 Views
Last Post September 30, 2020, 09:20:29 am
by mrhiviz
4 Replies
6376 Views
Last Post June 01, 2013, 08:55:34 pm
by xavier
1 Replies
2555 Views
Last Post May 31, 2013, 05:47:45 pm
by Mirez
13 Replies
5180 Views
Last Post July 08, 2013, 03:58:05 pm
by Chrispb
4 Replies
5031 Views
Last Post October 01, 2013, 08:47:22 pm
by Mirez

Advertisement: