Advert:


Recent Forum Topics:

Google Translate:

Ford Galaxy / VW Sharan / SEAT Alhambra Forum:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: air conn again  (Read 2063 times)

Offline martin sheppard

  • Default User Group
  • Standard Users
  • *
  • Posts: 15
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115
  • Region: West Midlands
air conn again
« on: August 01, 2016, 05:00:56 pm »
Just as get the air con working on my 130 tdi the air con on my 115 tdi has stopped!

The 115 was re-gassed two weeks ago ready for the wife to go away on holiday for the week, all worked fine.

Today the air con is no more,

compressor and fan are both coming in - no cold on the pipes.

My thoughts are knackered compressor, any suggestions?

Offline insanitybeard

  • Greetings from Mr Chick!
  • Global Moderator
  • Accredited Users
  • *
  • Posts: 2453
  • Thanked: 74
  • Model: Galaxy Mk2
  • Spec: '54 130ps TDI Ghia
  • First Name: Paul
  • Region: South West
  • Country: United Kingdom
Re: air conn again
« Reply #1 on: August 01, 2016, 05:19:21 pm »
Are you sure there isn't a slow leak which has allowed the gas to gradually escape since it was regassed a couple of weeks ago? Usually the compressors fail by seizing or the electromagnetic clutch disintegrates as a result of compressor problems, if the compressor is still rotating/ switching in freely it wouldn't be the first place I'd look to find the cause of the problem, though that's not to say it couldn't be at fault of course.
Always learning..... Often by mistakes!

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3254
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: air conn again
« Reply #2 on: August 01, 2016, 05:35:33 pm »
If fan and comp are coming in that would indicate either compressor knackered or clutch on compressor drive has failed.
With aid of a helper are you able to see if the compressor cuts in when air con switched on or is it just freewheeling?

If it has lost its refrigerant along with locating and repairing the leak I would also be checking the low pressure switch out as that should stop an empty system from operating.


Offline martin sheppard

  • Default User Group
  • Standard Users
  • *
  • Posts: 15
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115
  • Region: West Midlands
Re: air conn again
« Reply #3 on: August 01, 2016, 05:39:35 pm »
i just assumed that the pressure switch is seeing pressure.

you can see the nuts turning when a/c is called for

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3254
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: air conn again
« Reply #4 on: August 01, 2016, 05:53:02 pm »
Sounds to me like it is either a failed compressor or low fridge with a knackered pressure switch.

Best way to tell cheaply is get some air con gauges put in see what resting pressure is

Offline martin sheppard

  • Default User Group
  • Standard Users
  • *
  • Posts: 15
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115
  • Region: West Midlands
Re: air conn again
« Reply #5 on: August 01, 2016, 06:01:23 pm »
I agree, the guy did put some dye in and i have a uv torch - guess what i'm doing this week end

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3254
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: air conn again
« Reply #6 on: August 01, 2016, 06:26:41 pm »
I have been looking at my air con and recently found out the receiver/drier filter in end of condenser can leak from the cap. Apparently very difficult to trace as they leak slowly.

There is a plastic dust cap on top pop that off and have a look in to see if there is a crusty build up,you can also put some soapy water in see if any bubbles form around the aluminium cap/circlip.

 

Related Topics

  Subject / Started by Replies Last Post
2 Replies
15339 Views
Last Post April 05, 2012, 10:43:38 pm
by gregers
2 Replies
3814 Views
Last Post December 16, 2012, 09:44:32 pm
by redwon
8 Replies
4018 Views
Last Post March 23, 2013, 09:58:52 pm
by allbluedave
11 Replies
6033 Views
Last Post June 04, 2015, 09:49:52 pm
by SilverBeast
31 Replies
17401 Views
Last Post January 26, 2016, 10:43:18 am
by mike wilson
26 Replies
1187 Views
Last Post March 04, 2020, 10:22:31 am
by johnnyroper

Advertisement: