Advert:


Recent Forum Topics:

Google Translate:

Ford Galaxy / VW Sharan / SEAT Alhambra Forum:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: fitting a towbar to 2003 galaxy 1.9 TDI  (Read 5121 times)

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
fitting a towbar to 2003 galaxy 1.9 TDI
« on: July 09, 2016, 10:46:41 am »
I am thinking of fitting a new tow bar to my Galaxy. how easy to take off the rear bumper?,  I can only see the fixing screws inside the mudguard (three each side) is there any more anywhere else? . is there a guide on how to remove it on this forum?. have search but could find none so far.   
« Last Edit: July 09, 2016, 10:49:11 am by maysani »

Offline casquerman

  • Default User Group
  • Standard Users
  • *
  • Posts: 19
  • Thanked: 2
  • Model: Alhambra Mk2
  • Spec: tdi 130 2005
  • Region: Non UK
  • Country: Spain
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #1 on: July 09, 2016, 11:02:32 am »
I just mount a towbar in my alhambra this week. 
The rear bumper was removed/painted/installed in a friends paintshop but I did the towbar installation. 
If you need some advice for the wirings let me know

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #2 on: July 09, 2016, 11:22:26 am »
I am thinking of fitting a new tow bar to my Galaxy. how easy to take off the rear bumper?,  I can only see the fixing screws inside the mudguard (three each side) is there any more anywhere else? . is there a guide on how to remove it on this forum?. have search but could find none so far.   

If I remember correctly there are a couple each side by wheel arch liner and also under the rear lights,it then pulls out.

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 179
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #3 on: July 09, 2016, 06:13:39 pm »
Yeah the main two fixings are behind the rear light lower covers. Pop these off and then there is a large thorx bolt  behind.

I dont think there is a guide so feel free to give a little back and write one since you are doing the job ;)
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #4 on: August 22, 2016, 09:27:15 pm »
I have finally ordered the tow bar and hoping to fitted this coming bank holiday.
Casqueryman,  I would highly appreciated any advice regarding wiring. the tow bar will come with universal 7 pins trailer connector. I will take some pics and share it with you guys.

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 179
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #5 on: August 24, 2016, 05:41:44 pm »
There are basic wiring instructions in the ref library under the towing thread. Would be good to get some pics for it though *hint hint*  ;D ;D
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #6 on: August 27, 2016, 06:32:25 pm »
i managed  to fit the towbar today. it is  relatively easy, perhaps the biggest challenge was to take off the rear bumper. The towbar came with instructions which were easy to follow. The wiring was also easy,  just connected to the existing car wiring (L/H indicator, R/H indicator, tail light , stop light and fog light) some pics were taken and i need to organise before I load them. However I am facing another challenge, i.e the parking sensors stopped working. All it does is making a low noise for few second then stops and keeps flashing. I heard that towbar may interfere  with parking sensors, if so,  any remedy.  I checked all the wiring and contraction they look all OK to me.   

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #7 on: August 27, 2016, 06:41:55 pm »
Have you connected all the sensors back up after refitting bumper?

The noise you are getting is indicating a fault,I would think if tow bar is interfering with PDC you would get constant noise like an obstruction?

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #8 on: August 27, 2016, 07:31:24 pm »
correct, reading the owner guide, page 178, indicates that the system is malfunctioning. I did check all the sensors,   the front and the back ones and all seems to make ticking noise when the ignition switch is on and the gear on reverse.   

Offline johnnyroper

  • RL Contributor
  • Accredited Users
  • *
  • Posts: 3255
  • Thanked: 171
  • Model: Galaxy Mk2
  • Spec: 02 tdi 115 ghia
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #9 on: August 27, 2016, 10:53:39 pm »
Get vcds plugged in see what code it brings up,got a starting point of where to look then

Offline steveo59

  • Default User Group
  • Advanced Users
  • *
  • Posts: 54
  • Thanked: 4
  • Model: Galaxy Mk2
  • Spec: 01 tdi 115 ghia
  • First Name: Steve
  • Region: East Midlands
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #10 on: August 27, 2016, 11:16:14 pm »
Hi,
You can check which sensor is not working on vag-com/vcds.

Offline I MAC

  • Default User Group
  • Accredited Users
  • *
  • Posts: 118
  • Thanked: 1
  • Model: Galaxy Mk2
  • Spec: 05 tdi 115 Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #11 on: August 27, 2016, 11:26:45 pm »
i managed  to fit the towbar today. it is  relatively easy, perhaps the biggest challenge was to take off the rear bumper. The towbar came with instructions which were easy to follow. The wiring was also easy,  just connected to the existing car wiring (L/H indicator, R/H indicator, tail light , stop light and fog light) some pics were taken and i need to organise before I load them. However I am facing another challenge, i.e the parking sensors stopped working. All it does is making a low noise for few second then stops and keeps flashing. I heard that towbar may interfere  with parking sensors, if so,  any remedy.  I checked all the wiring and contraction they look all OK to me.


am i right in thinking you cant get a dedicated wiring kit for the mk2 unless you go a dealer that is as i cant find one not unless its left hand drive anyway

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #12 on: August 28, 2016, 10:57:47 am »
attached is a doc explains how to take off the rear bumper and fit the twobar

Offline maysani

  • Default User Group
  • Advanced Users
  • *
  • Posts: 61
  • Thanked: 2
  • Model: Galaxy Mk2
  • Spec: 1.9 TDI Ghia
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #13 on: August 28, 2016, 11:43:44 am »
parking sensors update. i unintentionally disturbed the parking sensors buzzer connection in the boot when i wired the twobar. only noticed it this morning, put it back and everything is working perfectly now.

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 179
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Re: fitting a towbar to 2003 galaxy 1.9 TDI
« Reply #14 on: August 28, 2016, 01:17:12 pm »
Good work bud, will turn that into a ref lob doc shortly. Thanks!!
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

 

Related Topics

  Subject / Started by Replies Last Post
8 Replies
6003 Views
Last Post June 14, 2013, 09:26:36 pm
by gregers
7 Replies
3674 Views
Last Post January 17, 2014, 06:31:09 pm
by GReenCastle
1 Replies
2227 Views
Last Post April 22, 2014, 09:19:25 pm
by gregers
4 Replies
3896 Views
Last Post August 27, 2014, 05:54:21 pm
by biker01
1 Replies
1982 Views
Last Post March 04, 2016, 11:17:06 am
by insanitybeard
1 Replies
1782 Views
Last Post May 15, 2016, 01:51:03 pm
by johnnyroper

Advertisement: