I went out to the car the other day and noticed that the rear Ford oval had become just a piece of black plastic
- I'm used to seeing them as just the aluminium backing once the clear plastic top part (with the blue part of the oval and lettering) separates and falls off but I've not seen this before.... The black plastic backing also has Ford written on it in a manner that I wouldn't exactly call factory, like it's been done as a joke but it's almost like somebody's used a hot knife tip to melt the plastic...... very odd!
Anyway, new badge needed (I dislike leaving these kind of 'defects' with my car!)- Ford part number 1108560 (at least for the rear one), of course the majority of the adhesive foam that fixes the badge to the tailgate stayed stuck to the bootlid and didn't come off with the old backing so I then had to use solvent (autoglym tar remover in this case as it's not too aggressive to paintwork) and a
lot of elbow grease to shift the old adhesive foam, as you can see below there's a recess for the oval to sit in in the bootlid (and curiously a rubber plug sealing a hole in the tailgate itself which is normally hidden by the badge), though unfortunately no locating lugs to aid fitting the new badge squarely which I'd hoped there would be:
The new badge, simply sticks on to the tailgate with adhesive foam on the backing, no locating lugs:
Site Notification:
