Advert:


Recent Forum Topics:

Google Translate:

Ford Galaxy / VW Sharan / SEAT Alhambra Forum:

Owners Forums for Ford and Volkswagen MPVs / SUVs

Ford Galaxy S-Max C-Max B-Max Tourneo Connect / Volkswagen Sharan Touran Tiguan Touareg Caravelle / SEAT Alhambra Alteca?

Mk1 and Mk2 VW Sharan Mk1 and Mk2 Ford Galaxy Mk1 and Mk2 SEAT AlhambraFord C-Max B-MaxVW Tiguan VW Touran Mk3 Ford GalaxyMk3 VW SharanMk3 SEAT AlhambraVW T4 T5 Caravelle TransporterFord Tourneo Connect VW Touareg

Author Topic: VNT turbo actuator movement - loose then stiff  (Read 5425 times)

Offline Galaxy130

  • Default User Group
  • Regular Users
  • *
  • Posts: 26
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 05 TDI 130
  • Region: South West
VNT turbo actuator movement - loose then stiff
« on: April 20, 2015, 08:15:20 pm »
sorry another question....TDI 130 55 plate having put on a new MAP sensor a week ago, everything has been running better than before though still not 100%. Yesterday I was driving quite hard in 3rd and the car went into limp mode for the first time ever (had the car 6 mths). Switching off and then on again either doesnt clear it or it clears it but limp mode comes back very quickly with normal driving. I'm awaiting codes to be read (I cant make my ebay VCDS lite work anymore!) . Meanwhile have been under the car to look at actuator arm etc. When I first pulled down on the arm it went down really really easily and smoothly and I worked it up and down with ease. I came back 30 mins later the arm is just about solid and I can hardly move it. All the pipes were connected both times. Is there a simple explanation for this difference or does it give a  clue as to what is wrong?!

thanks :)

Offline Galaxy130

  • Default User Group
  • Regular Users
  • *
  • Posts: 26
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 05 TDI 130
  • Region: South West
Re: VNT turbo actuator movement - loose then stiff
« Reply #1 on: April 21, 2015, 08:24:40 pm »
strewth ??? has anyone ever got the circlip out of the actuator arm in order to see if the turbo arm moves freely without pulling half the engine to bits??!! I've now given up having spent the last 2 hrs trying to remove a single bolt that holds on the actuator bracket to the turbo......

Offline Chrispb

  • Mindsaysyesbodysaysnono
  • Administrator
  • Accredited Users
  • *
  • Posts: 3105
  • Thanked: 123
  • Model: Galaxy Mk2 Auto
  • Spec: 52reg TDI 115 Ghia
  • First Name: Chris
  • Region: South East
  • Country: United Kingdom
Re: VNT turbo actuator movement - loose then stiff
« Reply #2 on: April 22, 2015, 04:19:43 am »
It's fiddly but can be done as I've done it.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2009 Kia Sedona GS In Black 2.9CRDI 183PS. 5 Speed Manual WAV.
2003 MK2 Galaxy Ghia In Solid Black 1.9 TDI 115PS. 5 Speed Automatic.

Upgraded Eberspaecher booster heater  to independent heating with 7 day timer.

With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me.
All for a pint of Strongbow.

The FordMPV.com Forum - The free forum for questions and answers relating to the Ford Galaxy, S-Max and C-Max

Offline Galaxy130

  • Default User Group
  • Regular Users
  • *
  • Posts: 26
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 05 TDI 130
  • Region: South West
Re: VNT turbo actuator movement - loose then stiff
« Reply #3 on: April 22, 2015, 07:36:18 am »
did you do it by leaving the actuator body in place as you can only see the clip area with a mirror from beneath the car. I intended to undo the 2 bolts holding the actuator then somehow swing it to expose the clip but one bolt seized solid and now its rounding over - thinking of perservering with a ring spanner that will undo rounded bolts now. Cant get anything other than a ring spanner on it :(

got fault code P1556 charge pressure control negative deviation and am hoping its not sticky vanes......

Offline Chrispb

  • Mindsaysyesbodysaysnono
  • Administrator
  • Accredited Users
  • *
  • Posts: 3105
  • Thanked: 123
  • Model: Galaxy Mk2 Auto
  • Spec: 52reg TDI 115 Ghia
  • First Name: Chris
  • Region: South East
  • Country: United Kingdom
Re: VNT turbo actuator movement - loose then stiff
« Reply #4 on: April 22, 2015, 02:18:55 pm »
Yes only accessible from below, deffo ring spanner job, the clip I managed with a pair of long nosed pliers.
2016 Vauxhall Insignia Elite Nav in White 2.0CDTI Manual.
2009 Kia Sedona GS In Black 2.9CRDI 183PS. 5 Speed Manual WAV.
2003 MK2 Galaxy Ghia In Solid Black 1.9 TDI 115PS. 5 Speed Automatic.

Upgraded Eberspaecher booster heater  to independent heating with 7 day timer.

With VCDS lite (full version) need a code clearing or want to scan for faults in the north kent area, PM me.
All for a pint of Strongbow.

The FordMPV.com Forum - The free forum for questions and answers relating to the Ford Galaxy, S-Max and C-Max

Offline Galaxy130

  • Default User Group
  • Regular Users
  • *
  • Posts: 26
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 05 TDI 130
  • Region: South West
Re: VNT turbo actuator movement - loose then stiff
« Reply #5 on: April 22, 2015, 11:39:27 pm »
really good youtube vid here that shows circlip removal not required? just remove 2 bolts securing actuator then work lever by holding actuator body...

https://www.youtube.com/watch?v=o1Hvt2b7PL0

Offline Galaxy130

  • Default User Group
  • Regular Users
  • *
  • Posts: 26
  • Thanked: 0
  • Model: Galaxy Mk2
  • Spec: 05 TDI 130
  • Region: South West
Re: VNT turbo actuator movement - loose then stiff
« Reply #6 on: April 25, 2015, 11:52:05 pm »
well, if it is of interest, I removed bolts from actuator and was able to move the arm on the turbo with actuator attached and the arm was very obviously very loose and free moving so presume not a case of sticky vanes. Stuck a mityvac on the actuator and it moved to the stop from 3 to 18 setting as it should so no probs there and no vacuum loss. Removed pipe from N75 and attached mityvac to that end and no vacuum loss there at all. Underboost seems to have cured - no more limp mode. I dont really know what I have done to fix this!!! The only thing I can think of is when using a mirror to inspect the actuator rod, there only seemed approx 12mm of shiney metal showing by diaphram   whereas now its just over an inch so maybe I've freed the actuator up without realising.

Offline Mirez

  • Pondering the next mod...
  • Webmaster
  • Accredited Users
  • *
  • Posts: 3774
  • Thanked: 180
  • Model: Galaxy Mk2
  • Spec: 03 115PS Ghia
  • First Name: Mark
  • Region: South West
  • Country: United Kingdom
Re: VNT turbo actuator movement - loose then stiff
« Reply #7 on: April 28, 2015, 06:25:30 pm »
Quite probably, the actuator only sticks at one end of the travel and is generally very loose feeling throughout the rest. Good job :)
03 Ford Galaxy 1.9 TDI 115 Ghia in Spruce Green Metallic
With cream leather interior, Full Bodykit, Remapped at 145bhp, Lowered on 18's
08 Ford Transit 2.2 TDI 115 in Frozen White
With retrofitted everything except another slidey door! :)

LAUNCH X431 Pad PRO - Scanning & Coding for all makes and models done in Wiltshire in exchange for winegums! :)

 

Related Topics

  Subject / Started by Replies Last Post
4 Replies
3303 Views
Last Post September 29, 2013, 10:59:25 pm
by Mirez
9 Replies
4425 Views
Last Post December 21, 2014, 01:12:30 pm
by bigdave982
13 Replies
4292 Views
Last Post May 18, 2016, 02:42:18 pm
by johnnyroper
11 Replies
1844 Views
Last Post June 14, 2017, 10:00:11 pm
by marcushamblin1976
5 Replies
1073 Views
Last Post June 13, 2020, 08:45:51 am
by SirDavidAlhambra
4 Replies
208 Views
Last Post October 28, 2021, 06:12:15 pm
by johnnyroper

Advertisement: