Ford and Volkswagen MPV Forums

Large MPVs -- Ford Galaxy / VW Sharan / SEAT Alhambra: => Ford Galaxy / VW Sharan / SEAT Alhambra => Topic started by: mark.008 on March 27, 2012, 09:21:54 PM

Title: white dials
Post by: mark.008 on March 27, 2012, 09:21:54 PM
i am going to fit white dials to the gal but im not how to re-calabrate the clocks with vcds anybody know how to?
Title: Re: white dials
Post by: Mirez on March 27, 2012, 09:42:47 PM
You don't do it with VCDS! There is a predefined stop on each one, make sure the ignition is off when you disconnect the cluster, then push the needles back on and turn then counter clockwise until you feel them go hard / resistance - job done.

You can then use VCDS (only the full version) to enter the test mode of the cluster which will put each needle in its upright position (speedo to 62mph) so you can test they are right.
Title: Re: white dials
Post by: mark.008 on March 29, 2012, 09:13:13 PM
thanks mark i'm going to give it a go this weekend