Ford and Volkswagen MPV Forums

Large MPVs -- Ford Galaxy / VW Sharan / SEAT Alhambra: => Mk3 Ford Galaxy / Ford S-Max => Common faults and problems / Knowledge Base => Topic started by: Chrispb on February 03, 2013, 01:10:40 AM

Title: Ford Galaxy Mk3 - Replacing Stoplamp and Indicator bulbs
Post by: Chrispb on February 03, 2013, 01:10:40 AM
Replacing stoplamp and indicator bulbs requires removal of the rear lamp cluster.
Pull out left or right hand access panel (left hand shown) then unscrew the two large wing nuts (pic 3)

[attachimg=1]

Slide cluster from body enough to detach wiring connector, then remove the single screw and remove bulb holder.

[attachimg=2]

Replace bulbs as necessary.

[attachimg=3]
[attachimg=4]

When refitting the cluster make sure the guide channel in the cluster slides on to the guide clip on the body

[attachimg=5]


Quote from: FordMPV.com
Question? Something not quite make sense?
Posts in the reference library are locked but you can start a new topic on the subject by clicking here
(https://www.fordmpv.com/smf2/technical/?action=post)